CPU AMD Socket AM5, support for: AMD Ryzen™ 7000 / Ryzen™ 8000 Series Processors * Please refer to "CPU Support List" for more information. Chipset AMD X670 Memory Support for DDR5 8000(OC)/ 7800(OC)/ 7600(OC)/ 7200(OC)/ 7000(OC)/ 6800(OC)/ 6666(OC)/ 6600(OC)/ 6400(OC)/ 6200(OC)/ 6000(OC)/ 5600(OC)/ 5200/ 4800/ 4400 MT/s memory modules 4 x DDR5 DIMM sockets supporting up to 192 GB (48 GB single DIMM capacity) of system memory Dual channel memory architecture Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules Support for AMD EXtended Profiles for Overclocking (AMD EXPO™) and Extreme Memory Profile (XMP) memory modules (The CPU and memory configuration may affect the supported memory types, data rate (speed), and number of DRAM modules, please refer to "Memory Support List" for more information.) Onboard Graphics Integrated Graphics Processor with AMD Radeon™ Graphics support: - 1 x HDMI port, supporting a maximum resolution of 4096x2160@60 Hz * Support for HDMI version and HDCP * Support for native HDMI TMDS compatible ports. - 1 x Front HDMI port, supporting a maximum resolution of 1920x1080@30 Hz * Support for HDMI version (Graphics specifications may vary depending on CPU support.) Audio Realtek® Audio CODEC High Definition Audio 2/4/ * You can change the functionality of an audio jack using the audio software. To configure audio, access the audio software for audio settings. LAN Intel® LAN chip ( Gbps/1 Gbps/100 Mbps) Wireless Communication module Qualcomm® Wi-Fi 7 QCNCM865 (PCB rev. - , b, g, n, ac, ax, be, supporting GHz carrier frequency bands - BLUETOOTH - Support for 11be 320MHz wireless standard MediaTek Wi-Fi 7 MT7927, RZ738 (PCB rev. - , b, g, n, ac, ax, be, supporting GHz carrier frequency bands - BLUETOOTH - Support for 11be 320MHz wireless standard (Actual data rate may vary depending on environment and equipment.) Note: Wi-Fi 7 features require Windows 11 SV3 to function properly. (There is no support driver for Windows 10) Wi-Fi 7 channels on 6GHz band availability depends on individual country's regulations. Expansion Slots CPU: - 1 x PCI Express x16 slot, supporting PCIe (Note) and running at x16 (PCIEX16) * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. Chipset: - 1 x PCI Express x16 slot, supporting PCIe and running at x4 (PCIEX4) - 1 x PCI Express x16 slot, supporting PCIe and running at x2 (PCIEX2) Storage Interface CPU: - 1 x connector (Socket 3, M key, type 25110/2280 PCIe (Note) x4/x2 SSD support) (M2A_CPU) - 1 x connector (Socket 3, M key, type 22110/2280 PCIe (Note) x4/x2 SSD support) (M2B_CPU) Chipset: - 2 x connectors (Socket 3, M key, type 22110/2280 PCIe x4/x2 SSD support)(M2C_SB, M2D_SB) - 4 x SATA 6Gb/s connectors RAID 0, RAID 1, and RAID 10 support for NVMe SSD storage devices RAID 0, RAID 1, and RAID 10 support for SATA storage devices USB CPU: - 1 x USB Gen 2 Type-A port (red) on the back panel - 2 x USB Gen 1 ports on the back panel CPU + USB Hub: - 4 x USB ports on the back panel Chipset: - 2 x USB Type-C® ports, with USB Gen 2x2 support (1 port on the back panel, 1 port available through the internal USB header) - 2 x USB Gen 2 Type-A ports (red) on the back panel - 6 x USB Gen 1 ports (2 ports on the back panel, 4 ports available through the internal USB headers) - 4 x USB ports available through the internal USB headers Internal I/O Connectors 1 x 24-pin ATX main power connector 2 x 8-pin ATX 12V power connectors 1 x CPU fan header 1 x CPU fan/water cooling pump header 4 x system fan headers 2 x system fan/water cooling pump headers 3 x addressable RGB Gen2 LED strip headers 1 x RGB LED strip header 4 x SATA 6Gb/s connectors 4 x Socket 3 connectors 2 x temperature sensor headers 1 x front panel header 1 x front panel audio header 1 x USB Type-C® header, with USB Gen 2x2 support 2 x USB Gen 1 headers 2 x USB headers 1 x noise detection header 1 x THB_U4 add-in card connector 1 x HDMI port 1 x Trusted Platform Module header (For the SPI/ SPI SPI V2 module only) 1 x power button 1 x reset button 1 x Clear CMOS button 1 x reset jumper 1 x Clear CMOS jumper Back Panel Connectors 1 x Q-Flash Plus button 2 x SMA antenna connectors (2T2R) 1 x HDMI port 4 x USB Gen 1 ports 4 x USB ports 3 x USB Gen 2 Type-A ports (red) 1 x USB Type-C® port, with USB Gen 2x2 support 1 x RJ-45 port 3 x audio jacks I/O Controller iTE® I/O Controller Chip H/W Monitoring Voltage detection Temperature detection Fan speed detection Water cooling flow rate detection Fan fail warning Fan speed control * Whether the fan speed control function is supported will depend on the fan you install. Noise detection BIOS 1 x 256 Mbit flash Use of licensed AMI UEFI BIOS PnP , DMI , WfM , SM BIOS , ACPI Unique Features Support for GIGABYTE Control Center (GCC) * Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications. Support for Q-Flash Support for Q-Flash Plus Support for Smart Backup Bundled Software Norton® Internet Security (OEM version) LAN bandwidth management software Operating System Support for Windows 11 64-bit Form Factor ATX Form Factor; x |
